❌ Xilinx FPGA Boards for Mining

3 min read

VCU1525 - Active Cooled

The Xilinx VCU 1525 has extra cooling fans that can increase output. With current 170A Max and interconnects: 2x QSFP+. Also external memory, 4 DIMM slots 4x16GB ECC RDIMM DDR4.

vcu-1525vcu-1525-2
VCU1525VCU1525

Where to Buy?

StatusPrice
Sold Out$3600 USD

Bitstreams


Download FromAlgorithmHashrate
🔥 whitefire990's Page0xToken18 GH/s
Nexus2.6 GH/s


VCU1525 - Passively Cooled

The Xilinx VCU 1525 is just a normal FPGA that's good for mining certain coins. Originally this is something a hardware or digital design company would purchase and use in their labs, so there aren't any consumer-facing purchase channels setup. To buy one, you'd have to contact one of many distributors or try to buy one directly from someone else.

The VCU 1525 will be able to run most of the bitstreams released, but in order to achieve the maximum hash rates, you need to make modifications to it. These mods range from easy to complex, and usually aim to manage component temperature. These chips run hot quickly, so the more heat you can dissipate, the faster you can drive the clock, and the higher your hash rates.

vcu-1525vcu-1525-2
VCU1525VCU1525

Where to Buy?

StatusPrice
Sold Out$3600 USD

Bitstreams

Download FromAlgorithmHashrate
🔥 whitefire990's Page0xToken18 GH/s
Nexus2.6 GH/s


KU040

To start mining with KU040, first, run the TeraTerm 4.99 serial port utility, and connect to the CP210x port, set rate to 921600, parity to none, 8 data bits. Then, there will be appeared junk characters once per second on the display. At this point, close TeraTerm then launch the FX-tokenminer software and the KU040 should start mining.

ku040ku040-2
KU040KU040

Where to Buy?

StatusStore LinkPriceShipping Date
Available🛒 Xilinx$975 USD8 weeks

Bitstreams

Download FromAlgorithmHashrate
🔥 whitefire990's PageOxToken2.4 GH/s



Table Of Content