BEST ROI

👑 Monad Tech FPGA Boards for Mining

2 min read

Imperium V1

The FPGA mining board, Imperium V1 has two FPGA hashing boards. There are four KU040 FPGA chips on each board, which runs at 1.0V core voltage. Imperium miner has a dedicated core power supply with a maximum load up to 60A. Bitstream is configured via a serial interface which is driven by a controller board. Each board has a micro-controller chip to chain four FPGA devices. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-v1
Imperium V1

Where to Buy?

StatusStore LinkPriceShipping Date
Available🛒 FPGA Guide Shop$1699 USDFeb 7 2020

Bitstreams



Imperium V2

The FPGA mining board, Imperium V2 has three FPGA hashing boards. There are four KU040 FPGA chips on each board, which runs at 1.0V core voltage. Imperium miner has a dedicated core power supply with a maximum load up to 60A. Bitstream is configured via a serial interface which is driven by a controller board. Each board has a micro-controller chip to chain four FPGA devices. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-V2
Imperium V2

Where to Buy?

StatusStore LinkPriceShipping Date
Available🛒 FPGA Guide Shop$2500 USDFeb 7 2020

Bitstreams



Related Pages