BEST ROI

👑 Monad Tech FPGA Boards for Mining

4 min read

Imperium F2

The FPGA mining board, Imperium F2 has three FPGA hashing boards. There are six Kintex-7 K325T FPGA chips on each board. Bitstream takes only up to 10 seconds to upload which is much faster than the Imperium V series. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-F2
Imperium F2

Where to Buy?

StatusStore LinkPriceShipping Date
Available🛒 FPGA Guide Shop$1350 USDHosted only

Bitstreams



Imperium R2

The FPGA mining board, Imperium R2 has three FPGA hashing boards. There are six Kintex-7 K355T FPGA chips on each board. Imperium R2 has a maximum load up to 1350W. Bitstream takes only up to 10 seconds to upload which is much faster than the Imperium V series. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-R2
Imperium R2

Where to Buy?

StatusStore LinkPriceShipping Date
Available🛒 FPGA Guide Shop$1800 USD-

Bitstreams



Imperium V1

The FPGA mining board, Imperium V1 has two FPGA hashing boards. There are four KU040 FPGA chips on each board, which runs at 1.0V core voltage. Imperium miner has a dedicated core power supply with a maximum load up to 60A. Bitstream is configured via a serial interface which is driven by a controller board. Each board has a micro-controller chip to chain four FPGA devices. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-v1
Imperium V1

Where to Buy?

StatusStore LinkPriceShipping Date
Sold out🛒 FPGA Guide Shop$1699 USD-

Bitstreams



Imperium V2

The FPGA mining board, Imperium V2 has three FPGA hashing boards. There are four KU040 FPGA chips on each board, which runs at 1.0V core voltage. Imperium miner has a dedicated core power supply with a maximum load up to 60A. Bitstream is configured via a serial interface which is driven by a controller board. Each board has a micro-controller chip to chain four FPGA devices. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-V2
Imperium V2

Where to Buy?

StatusStore LinkPriceShipping Date
Sold out🛒 FPGA Guide Shop$2500 USD-

Bitstreams



Imperium R1

The FPGA mining board, Imperium R1 has two FPGA hashing boards. There are six Kintex-7 K355T FPGA chips on each board. Imperium R1 has a maximum load up to 900W. Bitstream takes only up to 10 seconds to upload which is much faster than the Imperium V series. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.

Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.

imperium-R1
Imperium R1

Where to Buy?

StatusStore LinkPriceShipping Date
Sold out🛒 FPGA Guide Shop$1599 USD-

Bitstreams



Related Pages